Kappa Series Nozzle Heaters

Kappa Series nozzle heaters offer an alternative to cast heaters. The Kappa Series is constructed with a nickel-plated copper inner sleeve and stainless steel outer sleeve. Low-profile design.

If you have any questions regarding Kappa Series nozzle heaters, please call us at 866-685-4443, send us an e-mail at sales@oemheaters.com, or fill out one of our contact forms.

Features

• Heater is tightly fitted between sleeves, eliminating the heat transfer problems associated with other dual-sleeved designs.
• Materials direct the heat inward toward the nozzle, resulting in a very efficient heater with even heat distribution.
• Tightly toleranced ID allows a slip fit with no clamping required.
• The thermal profiling method produces very flat temperature profiles over the length of the nozzle.
• Optimum heat distribution
• Profiled heating available

Specifications

• Can be manufactured with power densities over 100 W/in²
• 5-inch and 7-inch cold leads standard, 72-inch Teflon lead wires standard
• ± 0.0005-inch ID tolerance, ± 2% resistance tolerance
• 0.125 inch nominal wall thickness