Due to CoViD-19, there are some changes to our business. For current updates, please peruse this page. If you need information about the status of orders or quotes, you will get the quickest results by contacting your inside sales rep via e-mail.
Industrial electric heat supply made fast, simple, and accurate

 866-685-4443 | Get in Touch Online ...

Hazardous-Area Drum Heaters

Click Here for Free Engineering Assistance

If you are unsure which hazardous area drum heater is right for your application, please send us an e-mail, fill out one of our contact forms, or talk to one of our engineers at (866) 685-4443 to get started.

Description

  • Exclusive hazardous-area approval (FM approved Class I, division 2 Groups A, B, C, and D, Class II Division 2, Groups F and G)
  • Dual set-point NEMA 7-temperature controller connected to a high temperature limit indicator light
  • Exceptional 8" coverage area
  • Moisture- and chemical-resistant
  • Patented grounded heating element meets NEC427.23

Specifications

  • 8-inch-wide band
  • High-limit thermostat designed to keep heater below NEC article 500 T-rating
  • Power density: 2.5 W/in²
  • Heating element is laminated between 2 layers of 23-mil and two layers of 25-mil fiberglass-reinforced silicone rubber
  • Nominal silicone rubber density of 26 oz/yd² per layer
  • Attached adjustable dual set-point NEMA 7-temperature controller with 6-foot power cord. One set-point is set at a high temperature limit and connected to a red indicator light.
  • Blanket leads 6 feet long for NEMA 7 controller; 1 foot without controller
  • Leads from blanket to controller are enclosed in a liquid tight conduit
  • 392°F maximum exposure temperature on heating surface
  • Designed for use on metal drums

Support documents

Hazardous Area Drum Heater Specification Sheet