Temperature Controllers & Recorders
Temperature Controllers feature digital displays and selectable inputs. These Temperature Controllers are easy to operate with self tuning and the output can be ordered with a relay contact, voltage pulse, or a 4 to 20 mAmp output.
Temperature Controllers also accept various inputs from thermocouples, RTD, DC voltage and DC current. In addition these controllers can have two independent alarm contacts that are programmable to be deviation, process, or set value alarms.
Alarms can detect Heater Breaks, Thermocouple or RTD failure, short circuits, or the failure of an operating device such as a mechanical relay, SCR controller or SSR relay.
The Heater break alarms utilize an external current transformer that monitors the heater current and activates an alarm should the current fall below a threshold value that has been set by the operator.
Typical Applications:
- Auto tuning controls in 1/32, 1/16, 1/8 and 1/4 in sizes
- Single-Loop and Multi-Loop temperature controls
- Basic on/off controls and percent power control
- Ramping Controls for time and temperature profiling
- Solid-State Power Controls
- Standard I/O and communication options on most models
- Alarms and Limits controls for safety limit control
- Timer Controls
Temperature Controllers Feature:
- Standard inputs thermocouple, RTD
- Heat/Cool action
- Relay, Triac, DC voltage pulse or current output or voltage
- Heater break alarm for monitoring multiple parallel heaters
Heaters Flexible Heaters Foil Heaters Gas Cylinder Heaters Infrared Emitters Immersion Heaters: Heat Trace Cables Heating Tapes & Cords Process Air & Duct
Heaters Radiant Heaters Strip Heaters Tubular Heaters Heating Mantles Controls & Sensors: Heating Applications
7200 France Avenue
Minneapolis, MN 55435
Phone: 1-866-685-4443
Fax: 952-944-7878
