Teflon® Tank and Chemical Immersion Heaters: In Stock


TeflonŽ Single Element Coil Tank Immersion Heaters

Teflon® Single Element Coil Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • 26 watts/in2 (4.0 watts/cm2) for long service life.
  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 200°F or 95.3°C.) The TeflonŽ guard is supplied with the high temperature complete assembly.
  • Single phase standard; three-phase available as an option.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Part Number
in mm in mm 120V 240V 480V
500 5 127 11 279 TMT01001 TMT01002 —
1000 7 178 11 279 TMT01003 TMT01004 —
2000 12 305 17 432 TMT01005 TMT01006 TMT01007
3000 16 406 23 584 — TMT01008 TMT01009
4000 20 508 29 737 — TMT01010 TMT01011
5000 25 635 35 889 — TMT01012 TMT01013
6000 29 737 40 1016 — TMT01014 TMT01015



TeflonŽ Single Element L-Shaped Coil Tank Immersion Heaters

Teflon® Single Element L-Shaped Coil Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Bottom design for even heating and varying liquid levels.
  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Single phase only.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Part Number
in mm in mm 120V 240V 480V
500 6 152 12 305 TMT02001 TMT02002 —
1000 9 229 12 305 TMT02003 TMT02004 —
2000 12 305 18 457 TMT02005 TMT02006 TMT02007
3000 17 432 18 457 — TMT02008 TMT02009
4000 20 508 18 457 — TMT02010 TMT02011
5000 24 610 18 457 — TMT02012 TMT02013
6000 29 737 18 457 — TMT02014 TMT02015



Teflon Single Element Round Tank Immersion Heaters

Teflon® Single Element Round Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Flat, low profile design.
  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Single phase only.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Diameter Part Number
in mm in mm in mm 120V 240V 480V
500 6 152 14 356 5 127 TMT03001 TMT03002 —
1000 7 178 14 356 6 152 TMT03003 TMT03004 —
2000 9 229 17 432 8 203 TMT03005 TMT03006 TMT03007
3000 10 254 23 584 9 229 — TMT03008 TMT03009
4000 12 305 29 737 11 279 — TMT03010 TMT03011
5000 13 330 35 889 12 305 — TMT03012 TMT03013
6000 14 356 40 1016 13 330 — TMT03014 TMT03015




Teflon Single Element L-Shaped Round Tank Immersion Heaters

Teflon® Single Element L-Shaped Round Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Low profile bottom design for even heating and varying liquid levels.
  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Single phase only.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Diameter Part Number
in mm in mm in mm 120V 240V 480V
500 6 152 12 305 5 127 TMT04001 TMT04002 —
1000 7 178 12 305 6 152 TMT04003 TMT04004 —
2000 9 229 18 457 8 203 TMT04005 TMT04006 TMT04007
3000 10 254 18 457 9 229 — TMT04008 TMT04009
4000 12 305 18 457 11 279 — TMT04010 TMT04011
5000 13 330 18 457 12 305 — TMT04012 TMT04013
6000 14 356 18 457 13 330 — TMT04014 TMT04015




Teflon Three Element L-Shaped Tank Immersion Heaters

Teflon® Three Element L-Shaped Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Low profile bottom design for even heating and varying liquid levels.
  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Standard three-phase wiring.
  • 240 and 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Width Part Number
in mm in mm in mm 240V 480V
3000 13 330 18 457 7 178 TMT08001 TMT08002
6000 19 483 18 457 10 254 TMT05003 TMT05004
9000 23 584 18 457 10 254 TMT05005 TMT05006
12000 30 762 18 457 10 254 TMT05007 TMT05008
15000 36 914 18 457 10 254 TMT05009 TMT05010
18000 42 1067 18 457 10 254 TMT05011 TMT05012




Teflon Three Element Over-the-Side Tank Immersion Heaters

Teflon® Three Element Over-the-Side Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Single phase for 120V, three-phase for 240V or 480V standard.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Part Number
in mm in mm 120V 240V 480V
1000 9 229 17 432 TMT06001 TMT06002 —
1500 15 381 23 584 TMT06003 TMT06004 TMT06005
2000 21 533 29 737 — TMT06007 TMT06008
3000 28 711 35 889 — TMT06009 TMT06010
4000 38 965 47 1194 — TMT06011 TMT06012
5000 47 1194 59 1499 — TMT06013 TMT06014
6000 55 1397 68 1727 — TMT06015 TMT06016




Teflon Six Element Over-the-Side Tank Immersion Heaters

Teflon® Six Element Over-the-Side Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Single phase for 120V, three-phase for 240V or 480V standard.
  • 120, 240, 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Part Number
in mm in mm 120V 240V 480V
2000 9 229 17 432 TMT07001 TMT07002 TMT07003
3000 15 381 23 584 — TMT07004 TMT07005
4000 21 533 29 737 — TMT07006 TMT07007
6000 28 711 35 889 — TMT07008 TMT07009
8000 38 965 47 1194 — TMT07010 TMT07011
10000 47 1194 59 1499 — TMT07012 TMT07013
12000 55 1397 68 1727 — TMT07014 TMT07015




Teflon Nine Element Over-the-Side Tank Immersion Heaters

Teflon® Nine Element Over-the-Side Tank Immersion Heaters

Compatible with most plating tank solutions; inert to acids anodizing and pickling solutions up to 190°F (88°C).

  • Polypropylene guards (optional TeflonŽ guards recommended for chromic acid or solutions exceeding 180°F or 82.2°C.).
  • Standard three-phase wiring.
  • 240 and 480 volts standard as listed-other voltages available.

The part numbers shown are for the complete assembly including the heater poly guard and T1 thermal protector.

Watts Hot Zone Vertical Length Part Number
in mm in mm 240V 480V
3000 9 229 17 432 TMT08001 TMT08002
4500 15 381 23 584 TMT08003 TMT08004
6000 21 533 29 737 TMT08005 TMT08006
9000 28 711 35 889 TMT08007 TMT08008
12000 38 965 47 1194 TMT08009 TMT08010
15000 47 1194 59 1499 TMT08011 TMT08012
18000 55 1397 68 1727 TMT08013 TMT08014

From Stovck or Made to Order. We fit your application. (Canada & USA) 1-866-685-4443a
Request Info ASAP