 |
|
|
|
|
Thursday, March 11, 2010
|
|
|
|
|
|
|
|
...loading, please be patient... | Best | Better | Good | | | | | Also acceptable under certain conditions | Suggested Watt Density (sq.inches) | | | | Special Notes | | | Notes Legend | - Caution! This is a potentially flammable material!
- This is a mixture of various compounds whose proportions or composition is subject to change. Check with your supplier to confirm the best sheath material.
- The composition or dilution of this can vary widely. Check with OEM Heaters or your supplier for recommendations.
- Direct immersion heaters are not practical for this project. Instead use clamp-on heaters on a cast-iron pot or consult OEM Heaters for a better solution.
- Element surface loading should not exceed 20 watts per sqare inch.
- For concentrations greater than 15 percent, element surface loading should not exceed 15 watts per square inch.
- Concentrations vary widely. Consult your supplier for concentration information and OEM Heaters for specific advice.
- Remove any crusts or deposits at liquid level.
- Clean Often.
|
|
|
|
|
|
|
|
|
|
|
|
|