Sorry, the requested page is not working.

Please contact us to find what you were looking for by emailing at info@oemheaters.com or call us at 866-685-4443.

Are you looking for:

Construction

Foil Heater Construction:

Type A: Self- Adhering: Flexible

Self- Adhering: Flexible Construction

1. Aluminum Foil	4. Aluminum Foil
2. Adhesive	5. Adhesive
3. Element	6. Release Paper

Type B: Mechanically Fastened: Flexible

Mechanically Fastened: Flexible Construction

1. Aluminum Foil
2. Adhesive
3. Element
4. Aluminum Foil

Type C: Mechanically Fastened: Semi-Rigid

Mechanically Fastened: Semi-Rigid Counstruction

1. Aluminum Foil
2. Adhesive
3. Element
4. Aluminum Sheet: .025" thick

Foil Heaters are not available for online purchasing due to the large amount of custom heaters. Call 866-685-4443 or email info@oemheaters.com to request a quote or place an order.

Drum Heaters

Drum and Pail Heaters

Standard heaters fit 5, 15, 30 and 55 gallon pails and drums. They provide efficient heat to prevent freezing, increase flow, and maintain elevated material temperature. There are a variety of stock options available. Drum heaters can also be made to custom-fit your order. If you have any questions regarding Drum and Pail heaters please call us at 866-685-4443, send us an e-mail at sales@oemheaters.com, or send us a contact form.

This product usually ships 2-3 days after an order has been placed.

Applications:

Freeze Protection
Viscosity Control
Temperature Maintenance
Melting of solids
Biofuel/Biodiesel
Heat Contents to required temperature
Thermal Mixing... and much more

PTFE Heaters

Over-The-Side Fluoropolymer (PTFE) Immersion Heaters

PTFE sheathed Immersion Heaters are compatible with virtually every chemistry. All of our standard sizes available here can be configured prior to checkout. If you don't see the exact heater you need, or if you need a custom riser height, just let us know. You can send us an e-mail, fill out one of our contact forms, or give us a call at (866) 685-4443.

3HXOL Series

3HXOL Series PTFE Immersion Heater

3HXOL Fluoropolymer (PTFE) Specification Sheet
Thermal Overload Protection Chart

Additional Options:

Longer vertical lengths (cold zones).
Polypropylene guards*: recommended for applications up to 180ºF (82ºC).
Fluoropolymer (PTFE) guards: recommended for chromic acid or solutions over 180ºF (82ºC).
Special Configurations.
Longer wire and conduit lengths.
Lower watt densities for highly viscous solutions and technical acids.
Temperature and level controls sized to match the heater.
Single phase power.

*Guard is optional. Longer lengths available- Standard guard is polypropylene. Fluoropolymer guards recommended for chromic acid and solutions exceeding 180ºF. 3-Phase standard.

If you don't see the exact heater you need, or are having trouble finding the right configuration, send us an e-mail, fill out one of our contact forms, or give us a call at (866) 685-4443; we're here to help.

Coil Heaters

The following coil heaters are available coiled and shipped in one business day.
Built-to-order heaters usually ship within 5-7 business days- faster if expedited.

If you have any questions regarding Coil heaters please call us at 866-685-4443, send us an e-mail at sales@oemheaters.com, or send us a contact form.

	Flat Coil Heaters Precise fit and profiling optimizes performance of nozzles and other mating components. Flexible cold section Outside sheath to improve heating efficiency Inside/outside sheath with sealed end rings prevent contaminants from shortening heater life Moisture resistant transition head High temperature lead and potting option Higher watt density than a cable heater Custom wound from straight stock for fast shipments
	Low Profile Coil Heater Delivers the same performance of a standard coil heater with a thinner profile. The height allows system designers to place drops closer to waterlines, enabling a smaller footprint. The width delivers higher wattage per linear inch compared to mini coils. Thinnest available coil heater with integrated TC (J or K) Flexible cold section Built to order ships in 5-7 working days Sealed transition head option for moisture resistant applications
	Round Coil Heaters This coil heater boasts compaction and flexibility, which is what helped it revolutionize the injection molding industry in the 1980's. Also used as a form in place heater Offers higher watt density than cable heater Flexible cold section Standard lead time si 5-7 working days (expedites available) Applications include: low profile packaging, plastic injection molding, small manifold heating
	Mini Coil/Micro Mini Coil Heaters High performance heaters for smaller diameter nozzles, nozzle tips, and can be formed in grooves to create three dimensional heating applications. Proven durable heater for tight space constraints Wound with external thermocouple Form in place heater Staggered or single head transition head configurations Built to order ships in 6-8 business days (expedites available)
	Maxi Coil Heaters The most durable coil heater on the market. Can support large diameters without the need of a pressed on sheath. The larger size allows for higher voltages and greater watt densities.
	Pressed in Brass Coil Heaters Tight fit on nozzle Optimal Heat Distribution Up to 1200ºF at inner brass casing Superior heat transfer Highly non-corrosive Built-in Type J or Type K
	HotLock® Mini Coil Heater Utilizes a positive locking positioning ring. Installation is easy. With a twist of the end cap ring, the heater is secured into position on the nozzle. Anti-Seize coating for ease of removal Replaceable external thermocouple profiled for more heat at the tip