High Temperature Heating Cords

• Perfect for laboratory, production, or maintenance applications
• Extremely flexible: they can fit around pipes as small as 1/8"
• Includes 9" long high temperature tie downs for easy installation
• Custom sizes are available upon request

Construction Styles

	Non- Expandable One-Piece Band Construction The non-expandable design provides the most heated surface area. This style can only be used where it can be slipped over the end of the barrel. Features built-in full-width clamping bars.
	Expandable One-piece Band Construction The expandable one-piece design allows for easy placement along the machine barrel while minimizing the unheated area compared to a 2 piece band heater. This style is available with a dual voltage
	Two-Piece Construction Two-piece band heaters are ideal for applications where sliding the heater on the end of the barrel is difficult. Installation and removal takes minimal time and labor. Two-piece construction provides dual voltage capability.
	Hinged Construction The two-piece band heater is designed for applications where frequent installation and removal is necessary. The full-width hinge can be opened and closed as often as needed. The preferred method of clamping is latch and trunion. It is available with any screw terminal or lead wire variation. Watts and volts for each half must be determined when ordering.
	Cut-outs and Holes The purpose of the holes and cutouts in the MI-Plus band heaters is for thermocouples and obstructions on the machine. These cutouts should be kept to a minimum. In most cases, an oversized gap can take care of the obstruction or thermocouple issue. The heated area is decreased with cutouts resulting in higher watt density. If holes and cutouts cannot be avoided, send us a detailed drawing with your request.
	Thermocouple and Bayonet Adaptors Thermocoupling couples facilitate the installation of an external thermocouple with a threaded fitting. The standard bayonet adaptor facilitates the installation of a thermocouple with a standard bayonet cap. The standard location is 90º from gap.

Clamping Options

	MI-Plus Standard Built-in Clamping Strap The built-in clamping strap will remain functional for the life of your MI-Plus heater. The steel clamping bars are the full width of the heater to distribute the forces evenly for superior heater contact. 1/4-20 alloy steel socket head cap screws are used to maximize the clamping power. Standard on all MI-Plus heaters 3" in diameter and larger with widths greater than 1" Type NB- One-piece Band  Type NS- Two-Piece Band Type NE- One-Piece Expandable band
	MI-Plus Low Profile Built-in Clamping Strap Used for applications where space is limited, this design saves space without compromising strength. This compact design uses 10-32 alloy socket head cap screws. Standard on all MI-Plus heaters less than 3" in diameter; Optional on MI-Plus heaters with 3" and larger diameters up to 6" in width. Type LB- One-piece band Type LS- Two-Piece Band Type LE- One-Piece Expandable band
	MI-Plus Outrigger Built-in Clamping Strap This design is unique to 1" wide heaters 1-3/8" in diameter and greater. Two 8-32 alloy socket head cap screws are used to give 1" wide heaters the required clamping power. Type OB- One-Piece Band Type OS- Two-Piece Band
	MI-Plus Separate Clamping Straps The MI-Plus band can be built without built-in brackets. This is an option that allows a separate strap to properly clamp the heater. Separate straps are useful when clearance is limited or there is an obstruction. Separate straps are made to customer specifications only. Consult OEM Heaters for details. Type SB- One-Piece Band Type SS- Two-Piece Band Type SE- One-Piece Expandable Band
	MI-Plus Spring Loaded Built-in Clamping Strap Standard on heaters over 8" in diameter and as an option on any heater with standard brackets. The extra heavy duty compression springs serve to combat thermal expansion of the heater by self adjustment. This ensures excellent contact between the heater surface and the barrel or die. This type of clamping is also useful on vertically-mounted heaters. Minimum Width: 1½", Minimum Diameter: 3½" Type SL- One-Piece Band Type NSL- Two-Piece Band Type NEL- One-Piece Expandable Band

• Resolution: 120 x 120
• Total Pixels: 14,400
• Thermal Sensitivity: < 0.1º C
• Accuracy: ± 2% or 2ºC
• Temperature Range: -4ºF to 482ºF (-20ºC to 250ºC)
• Field of View: 25º x 25º
• Focus: Focus Free
• Detector: Uncooled Microbolometer
• Screen: 2.8" Color LCD
• Frame Rate: 9Hz
• Emissivity: 0.1 to 1.0 Adjustable
• Battery: Li-Ion batter lasts close to 5 hours
• Warranty: 2 year

FLIR Service Packages and Extended Warranties

FLIR i-Series Infrared Camera Specification PDF